Im to the point where the bags need to be put on my 86 c10... Doin bag work is no problem, but i dont want to attempt z'ing the frame myself. Is there anyone within a decent drive time from longview texas that would be interested in hookin up a white boy with a z? There is a guy locally that i know and trust, but hes so backed up, its possible it will be 6 months or longer before he can get to it.

And x-members like the porterbuilt or suicide doors members that raise the front suspension without a z are out of my price range for this truck.


later

how big of a z do you want? what size wheels you running?you want the tranny tunnel done to?

Got 22's on it, and whatever needs to be done to get the truck flat I want done. I'm not to familiar with what's involved in a z, since all I've had are s10s. Mike O was tellin me about someone in Henderson, I guess your him?

yup, he da one!

that'd be me.... and if you dont want any more than 1.5 inches you can get away with the stock tranny tunnel and would stille be able to run the stock steering shaft.....

anymore you will need to raise the tranny tunnel as much as you z it to allow ample clearance for transmission removal/installation........

You think the front would lay with a 1.5 and 2.5 drop spindles? Tires are 28.7 tall

if not, it would be extremely close... depends on what bags you run and how tall the cups are....but yeh more than likely.......

was planning on running re7's in the front. as far as brackets go, i havent decided on cups or the cup plate combo that ive seen on suicide doors page...

pm me some numbers on what it might cost me to get the z done

hell you could go look at his build up section on his c-10 and see some work! im sure he knows a thing or two bout em! lol

whats the rate for a Z?

depending on how much you z if varies from 400 to 800.......

but MY shop rate is about 30 an hour.....

I havent forgot about ya man. Ive been busy ordering all my parts for the truck. Im still gonna get ahold of ya when its time to z it