NOOB from CT would like to join

hey all my name is Scotty and im from a small town in CT. Ive been working on this 01 ext cab from a wheel chair for the past five yrs and havent stopped bustin my back on her since the day I brought her home. Currently lays on 22"X9.5" Rox Edge wheels, 1/2" hydraulic lines,valves and a bunch of other goodies.
Let me know what you think of my evil angel. I think I would make an acceptional member of Acrophobia and hope you'll accept me

welcome. looks like a hell of a start to a badass truck. what other plans do you have for it?

Welcome what part of CT you fom.

Welcome

SHAVED&LAYED wrote:

welcome. looks like a hell of a start to a badass truck. what other plans do you have for it?

Thx. come spring I plan to ditch the RE6's currently in the front of the truck and cut the pockets out for RE8's.. yes 8's (currently running SS8's in the rear) Have a ton of parts here just waiting for it to get warm again. Ill be putting on a set of 3/4" GC 250 Extreme valves for front fills to replace the 1/2" and upgrading my rear lines to 3/4" hydraulic as well. Truck is already plenty fast but im determined to get it faster.
Right now I have a SD 3 link with bags behind and under axle but I picked up the rest of a bolt on 5 link so Ill be getting to that as well right away and ditching the bag on axle setup.
Interior is mostly stock besides Blazer power buckets and console but Ill be adding a Billet Specialties wheel I already purchased, billet defrost vent, speaker grilles and air freshner, and a set of white Alero needles to my gauge cluster.
Just a few things on my emmediate to do list as soon as the frost breaks.

Adam wrote:

Welcome what part of CT you fom.

thx Im from stafford springs

Acro RI Rob wrote:

Welcome

thx man glad to be here

Ive been an active member on S10forum.com for the past 5 yrs religously and my project can be found in the "Baggin It" forum under "so please MTV... Gimp my ride!"

what up scotty!?

Andrew B wrote:

what up scotty!?

not much bro whats good. havent been a noob in a long time. SO WEIRD

Haha what happened to your bed in that pic?

welcome

WELCOME! damn good looking start!

Idk where that's at I was born in Putnam my dad lives in enfield I used to go up there during the summer when I was a kid.

Seen the build on S10forum, definately looks good, especially doing all that work from a chair... welcome

Welcome bro. Good looking truck you got there

welcome.. lookin good!

welcome nice dime

Andrew B wrote:

Haha what happened to your bed in that pic?

i got backed into in August by this lowered rice burned Honda Accord with a dropped tow hitch and it pushed my wheel well back a couple inches. Its been fixed since. I love how you notice the wheel well is off but not the Brazilian Tails lawlz

Adam wrote:

Idk where that's at I was born in Putnam my dad lives in enfield I used to go up there during the summer when I was a kid.

Stafford is about 20 minutes north up route 190 from Enfield. I spend about 50% of my time in Enfield actually because thats where all my friends live at. I worked in Enfield a yrs ago at Lia Honda for a while too

lowridinrebel wrote:

Seen the build on S10forum, definately looks good, especially doing all that work from a chair... welcome

Thanks brother. I dont let anything hold me back. Ive been doing this for yrs and love every bit of it. You got a nice one yourself

1SikBu wrote:

Welcome bro. Good looking truck you got there

Thanks man I was looking at your car the other day that thing is sick!!!!
Thanks everyone else for the welcoming!

A little bit more info on my truck because I was so brief with my beginning intro

2001 Ext Cab Chevy S10 Extreme. (ground effects ditched)
Exterior:
HRF Black
00 GMC front end
Sir Michaels rollpan molded
Gimp 00 Vantiy Plate
Access Tonneau Cover

Engine/Performance
4.3L
K/N cold air intake
Airaid Throttlebody spacer
Wait4me tuned PCM
2.5" stainless exhaust (no cat)
Spintech Pro Shootout muffler

Suspension:
RE6 bags (front)
MMW Jebus Joint flat plate upper control arms
Dehumped Lowers
2" Belltech drop spindles
Suicidedoors Bolt On 3 link (axle brackets welded on)
behind and under axle bag brackets
Suicidedoors 8" step notch
SS8 bags (rear)
12 gallon 10 1/2" port Newmaticsinc steal tank
York 209 Engine Driven Compressor
Two Viar 380's
Truck is plumbed with 1/2" steel braided Hyrdaulic line and 1/2" tapered Hydraulic fittings

Wheels/Tires:
22"X9.5" Rox Edge (no longer manufactured)
Falken 245/30/22 (mild stretch)

2013 Plans:
Install York 210 Engine Driven Compressor (sitting on shelf)
Install rest of 5 Link (sitting on shelf
Install 8" Chrome Summit Brake Booster (sitting on shelf)
Install Lowrider Depot raised gas tank X member to replace cut up SD X member
Install new stock gas tank to replace 10 gallon Devious Custom gas tank
Install front stock sway bar and Ford F150 endlinks (sitting on shelf)
Truck needs shocks on all four corners
3/4" GC 250 Extreme front fill valves to replace current 1/2" GC's (sitting on shelf)
Install 3/4" rear Hydraulic lines and fittings replacing current 1/2" (sitting on shelf"

and much much more!! You guys know how it is..

Pics.. Everyone likes pics right









Thats all for now.. Thanks for looking
Scotty

welcome

Nice looking start. I love the wheeS!

those wheels are bad ass! the lips look like they are so deep that a cat could get inside them and take a shit!

screwdriver wrote:

so deep that a cat could get inside them and take a shit!

ummm ok lmao

BEAU wrote:

Nice looking start. I love the wheeS!

thx man

screwdriver wrote:

those wheels are bad ass! the lips look like they are so deep that a cat could get inside them and take a shit!

Im lawlin

very good looking truck bro. welcome!!!

Thx Drock I appreciate it bro!

welcome man

Welcome Sir.